一种改进的混合BLISS多学科设计优化方法

针对BLISS 2000优化过程中权值系数的引入给实际应用带来的困难,提出一种改进的BLISS优化过程——混合BLISS( Hybrid BLISS,HBLISS).该方法在保持BLISS 2000的基本算法结构的基础上取消权值系数,利用耦合变量的最小残差协调子系统级和系统级优化,给出了HBLISS的算法结构和基本流程...     

Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings

This paper presents an actuator used for the trajectory correction fuze, which is subject to high impact loadings during launch. A simulation method is carried out to obtain the peak-peak stress value of each component, from which the ball bearings are possible failures according to the results. Subsequently, three schemes against impact loadings, full-element deep groove ball bearing and integrated raceway, needle roller thrust bearing assembly, and gaskets are utilized for redesigning the actuator to effectively reduce the bearings' stress. However, multi-objectives optimization still needs to be conducted for the gaskets to decrease the stress value further to the yield stress. Four gasket's structure parameters and three bearings' peak-peak stress are served as the four optimization variables and three objectives, respectively. Optimized Latin hypercube design is used for generating sample points, and Kriging model selected according to estimation result can establish the relationship between the variables and objec-tives, representing the simulation which is time-consuming. Accordingly, two optimization algorithms work out the Pareto solutions, from which the best solutions are selected, and verified by the simulation to determine the gaskets optimized structure parameters. It can be concluded that the simulation and optimization method based on these components is effective and efficient.     

Multi-objective design optimization of composite submerged cylindrical pressure hull for minimum buoyancy and maximum buckling load capacity

This paper presents the design optimization of composite submersible cylindrical pressure hull subjected to 3 MPa hydrostatic pressure. The design optimization study is conducted for cross-ply layups [0s/90t/0u], [0s/90t/0u]s, [0s/90t]s and [90s/0t]s considering three uni-directional composites, i.e. Carbon/Epoxy, Glass/Epoxy, and Boron/Epoxy. The optimization study is performed by coupling a Multi-Objective Genetic Algorithm (MOGA) and Analytical Analysis. Minimizing the buoyancy factor and maximizing the buckling load factor are considered as the objectives of the optimization study. The objectives of the optimization are achieved under constraints on the Tsai-Wu, Tsai-Hill and Maximum Stress composite failure criteria and on buckling load factor. To verify the optimization approach, optimization of one particular layup configuration is also conducted in ANSYS with the same objectives and constraints.     

弹道修正弹系统效能灵敏度分析

灵敏度分析是武器系统效能分析中的一项重要内容,针对正交试验的不足,在分析了弹道修正弹系统效能的影响因素的基础上,建立了基于均匀设计的弹道修正弹系统效能的回归模型。通过对模型求导得到了命中概率对各参数的灵敏度表达式,并进行优化分析,得到了系统效能参数的最优组合以及最优区间,研究结果可作为弹道修正弹参数优化设计的依据。     

并行工程关键使能技术及其发展趋势

介绍了并行工程(ConcurrentEngineering,简称CE)的定义、基本原则、组成、驱动力和要素等,概要介绍了CE的部分关键使能技术。基于CE的理论研究与应用实践,给出实施CE的基本模式并进一步设想了CE的发展趋势。     

并串联系统设计优化

建立了并串联系统设计优化的两类模型,提出了遗传算法与模式搜索、启发式算法相结合的求解方法．     

并行工程中的结构分析

简要介绍了并行工程的概念 ,分析了防空导弹弹体结构件传统设计、分析过程中存在的问题 ,提出了实现并发设计的途径并在实践中应用验证。结合研究与实践探索 ,提出本领域的发展设想。进一步指出 :设计与分析的并行是必然的发展趋势     

C4ISR分布式信息融合系统拓扑结构设计

提出一种构造分布式信息融合系统的拓扑结构的新方法.首先,简要介绍了该问题的研究现状;然后,在对目前使用的网络结构进行深入分析的基础上,提出了基于多层de Bruijn网的分布式信息融合系统网络拓扑结构及其构造方法;最后讨论了上述网络结构的路由问题.     

键联接的优化设计及可靠性计算

用优化设计的方法建立了键联接的优化数学模型,并对键联接进行了可靠性分析。     

时序驱动的详细布局方法

针对超大规模集成电路布局过程中时序优化问题,提出一种时序驱动的详细布局方法。对设计进行时序分析并获取时序违反路径集合,对路径上两个连续固定单元间的线网进行平滑处理,以减小路径曲折度以及减少线长。再针对每一个可移动单元与其相邻的线网建立二次规划时序模型,求解局部最优布局位置。对于给定的测试电路,实验结果表明,最差的时序违反与总的时序违反均有明显改善,采用ICCAD2015竞赛的测试模板和评价方法,总的时序性能有45~350 min的提升。